Configure MID Server for Exchange

  • Rversion finale: Australia
  • Mis à jour 12 mars 2026
  • 1 minute de lecture

    • Configure a MID Server with defined IP ranges to use Exchange.

    Avant de commencer

    Role required: admin

    Pourquoi et quand exécuter cette tâche

    If the MID Server manages resources within defined IP ranges, instead of all computers on your network, you must perform additional configuration steps to run Exchange activities. You do not need to perform these steps if your MID Server uses the default configuration.

    Procédure

    1. In the navigation filter, enter cmdb_ci_dns_name.list.
    2. Click New.
    3. Enter the fully-qualified domain name (FQDN) of your Exchange server in the Name field.
    4. Right-click the form header and select Save.
    5. In the IP Address related list, click New.
    6. In the IP Address field, enter the IP address of your Exchange server.
    7. In the Nic field, select eth0 or your preferred network interface controller.
    8. Leave the Netmask field blank.
    9. Click Submit.