---
sourceDocument: Brazil Enable AI
sourceDocumentLink: https://www.servicenow.com/docs/r/intelligent-experiences

 Release :

    - brazil

ft:locale :

    - en-US

ft:publication_title :

    - Brazil Enable AI

ft:clusterId :

    - platai

bundleId :

    - platai

workflow :

    - Platform


---

# Process images for new tasks

# Platform Process images for new tasks agentic workflow {#ariaid-title1}

Release version: Brazil  
Updated October 27, 2026  
![](https://www.servicenow.com/docs/portal-asset/ico-clock) 5 minutes to read
Summarize  
![AI sparkle icon](https://servicenow.com/docs/portal-asset/ai-sparkle-icon) Summarized using AI  
This content was generated using new OpenAI-powered functionality. Results are provided on an as is basis and are not guaranteed to be accurate or complete.  

## Summary of Platform Process Images for New Tasks Agentic Workflow

The Platform Process Images for New Tasks agentic workflow automates the conversion of images into actionable task records, reducing manual data entry and improving task management efficiency.
It extracts key information from images, such as error messages, and presents this analysis to users.
Users can review and modify task details---like short description, category, and priority---before submitting.
Once confirmed, the workflow creates an incident record and attaches the original image.
Show full answer Show less  
This workflow leverages AI applications for agents, tools, and triggers, and can be activated via the ServiceNow Otto panel. Customization requires duplicating the workflow and adjusting instructions as needed. Access to features depends on your ServiceNow license tier.

## Prerequisites and Setup

* **Required installation:** ServiceNow Otto for Platform must be installed, which is included with other AI applications.
* **User roles:** Users need the `snuxcgenai.platformaiimageprocessor` role to invoke the workflow.
* **Virtual Agent integration:** To enable task creation from images within ServiceNow Otto for Virtual Agent, activate the Image Processor Agent, Record Management AI Agent, and Document and Visual Insights AI Agent, and configure the display to include Virtual Agent. Note that the workflow itself is not discoverable directly in Virtual Agent, so individual AI agents must be enabled.
* **Role filtering and security controls:** Ensure that user access roles and data access roles (e.g., `itil` for Incident records) are properly configured to allow creation and reading of relevant records.

## Configuration

Adjust workflow behavior by modifying values in the **Now Assist Skill Config Var Set** , particularly the `Image to task config` record and its related `Tables Mapping` configuration. Key configurable elements include:

* **roleandtablemap:** Maps user roles to tables they can create records on (e.g., users with `itil` role can create Incident records).
* **getlocationdetails:** Controls inclusion of image location metadata.
* **tableslist:** Specifies tables where tasks can be created from images.

## Accessing and Using the Workflow

* Access the workflow via AI Agent Studio under **Agentic Solutions \> Agentic workflows**, selecting "Process images for new tasks." Legacy AI Agent Studio access is also available.
* During setup, review included AI agents and tools, which provide detailed steps and roles.
* Agentic workflows appear in the Core UI and AI Activity panel, where users can track progress and provide input.
* Enable UI actions in AI Agent Studio to allow workflow invocation from UI elements, ensuring the system property `com.glide.agenticprocessesview.enabled` is set to `true`.
* Trigger the workflow using phrases like "Convert image to new task" in the ServiceNow Otto panel or run tests within AI Agent Studio if assigned appropriate roles.

## AI Agents Utilized

The primary AI agent involved is the **Document and Visual Insights AI Agent**, which extracts relevant information from images to facilitate task creation. Activation requires enabling the agent's status toggle in its guided setup.

## Why This Matters for ServiceNow Customers

This agentic workflow streamlines incident and task creation by intelligently processing images, reducing manual effort, improving accuracy, and accelerating response times. It integrates AI capabilities directly into task management processes, enhancing operational efficiency and user experience within ServiceNow.  
Use the Platform Process images for new tasks agentic workflow to convert images to actionable tasks.

## Process images for new tasks overview

The process images for new tasks agentic workflow can help decrease manual data entry and improve task organization by automatically converting images into task records. First, the agentic workflow extracts information from the image,
such as error messages, and presents the analysis to the user. Then, the user is presented with the details of the task, such as short description, category, and priority, before it is submitted so that they can make any changes. Once
the information is confirmed, the agentic workflow creates an incident record and attaches the image.

The agents, tools, and triggers that are associated with the process images for new tasks agentic workflow are provided by AI applications. You can [activate the agentic workflow template](https://www.servicenow.com/docs/9UjEwm2jQ1rzG05iHokkgA "Activate an agentic workflow that come installed with ServiceNow applications in AI Agent Studio.") and set the display settings to include the ServiceNow Otto panel. If you want to change this agentic workflow's instructions, you must [duplicate it to create a custom agentic workflow](https://www.servicenow.com/docs/jYTn11I8S6SrpWTEmMVUYA "Duplicate an existing agentic workflow in AI Agent Studio to save time by not having to manually configure or create agentic workflows."), adjust the settings to suit your specific needs, and activate the duplicated version of the agentic workflow instead.  
Note:  
Depending on your license, you will have access to certain application features, generative AI skills, agentic workflows, and AI agents. For more information, see [ServiceNow product tiers](https://www.servicenow.com/docs/QCGkmpN33vownhxo8L1ecg "ServiceNow structures its products and packages in three tiers — Foundation, Advanced, and Prime. Each tier incorporates AI and builds progressively on the previous one with additional AI capabilities, agents, and governance tools.").

## Prerequisites and setup

To access this workflow, you must have ServiceNow Otto for Platform installed on your instance, which you can get if you install any other AI application.

Users must have the sn_uxc_gen_ai.platform_ai_image_processor role to invoke the agentic workflow.

If you want the ability for users to create tasks from images using ServiceNow Otto for Virtual Agent, you must activate the Image Processor Agent, Record management AI agent, and Document and visual insights AI agent and set the display to include Virtual Agent. This agentic workflow cannot be discovered in Virtual Agent, so you must enable the individual AI agents that comprise it.

## Role filtering

Required role: sn_uxc_gen_ai.platform_ai_image_processor.

Agentic workflows and their AI agents use [role masking](https://www.servicenow.com/docs/iVyTaqmQoRgcYyPxVs0o1w "Role masking for AI agents and agentic workflows helps users enhance security by enabling them to limit their roles during tool execution and verify that AI agents run with least-access privileges.") to determine which users can access them. Ones installed with your applications have specific roles that come included with the application. If you select Users with specific roles for user access, you must configure the security controls to include these roles. For the instructions to change the security controls, see [Define security controls for an agentic workflow](https://www.servicenow.com/docs/~2RVfaXYWpMJMGxQAsOjqA "In the guided setup for an agentic workflow, define security controls for who can access the agentic workflow and what data the agentic workflow has access to.").

In the data access settings, you must also add the necessary roles to enable reading of the tables for the records you want to be able to make tasks on. For example, you can add the itil role to the agentic workflow's list of approved roles so that it can access Incident records.

## Additional configuration

You can change different settings related to the agentic workflow by changing values for the Now Assist Skill Config Var Set. To access the variable set and make changes, do the following while in the Platform AI Agents and Skills scope:

* Go to the Now Assist Skill Config \[sn_nowassist_skill_config\] table.
* Open the record named Image to task config.
* In the Now Assist Skill Config Var Set related list, select the Tables Mapping configuration variable set.
* Set the variables for the configuration type.
* Save the Var Set.

{#images-tasks__entry__2}

| Config field | Description |
|-|-|
| role_and_table_map | When a user triggers this agentic workflow, it checks the role of the invoking user and uses the map to determine what tables a user can make a record on. For example, if you map itil to Incident table, then users with the itil role can make Incident records with images. |
| get_location_details | Determines whether information about the image's location is included in metadata extraction. |
| tableslist | List of tables where you can make tasks from images |
[Table 1. Tables Mapping configuration]

## Accessing the Process images for new tasks agentic workflow

To access the agentic workflow in AI Agent Studio:

1. Navigate to AllAI Agent StudioAgentic Solutions.
2. Select the Agentic workflows tab.
3. Select Process images for new tasks.

{#images-tasks__ol_it_acc_new}

To access the agentic workflow in the legacy AI Agent Studio:

1. Navigate to AllAI Agent StudioCreate and manage.
2. Select Process images for new tasks.

The first step of the guided setup includes a complete list of included AI agents. Selecting the name of an AI agent opens it in a new browser tab, where you can see the full description, role, list of steps, and tools. Tools are
displayed in the second step of the AI agent guided setup, Add tools and information.

## In-product agentic AI and UI actions

Agentic workflows can be accessed in the Core UI and in workspaces in the AI Activity panel. From there, you can track their progress, provide or review input, and see the results of the work performed. For more information, see [In-product agentic AI](https://www.servicenow.com/docs/EpcQgY1TW9zL1noCh~NGXA "Dedicated spaces in workspaces and in the Core UI enable you to use agentic workflows directly in record forms. You can view agentic workflow progress and previous executions, and you can answer follow-up questions for ones that require human supervision.") for more details about the AI Activity panel.

To enable users to access agentic workflows with UI actions, you can open the agentic workflow in AI Agent Studio and navigate to the Select channels and access step. You can select a UI action as a possible way to access the workflow

If you don't see your UI actions after configuring it in AI Agent Studio, ensure that the property com.glide.agentic_processes_view.enabled is set to <kbd class="ph userinput">true</kbd>. See [Enable the in-product experience for agentic workflows](https://www.servicenow.com/docs/PvLU7GeYwsa0d8NtKQr7ug "Enable the AI Workflows panel and UI actions for agentic workflows on forms in the Core UI and workspaces to track agentic AI executions.").

## Sample utterance

After the workflow has been activated in AI Agent Studio, enter <kbd class="ph userinput">Convert image to new task</kbd> or similar phrases in the ServiceNow Otto panel to trigger the workflow. You can also run this workflow on the Testing page of AI Agent Studio with the same utterance in the Task field if you have the sn.aia_admin and sn_uxc_gen_ai.platform_ai_image_processor roles.

## AI agents used in the Process images for new tasks agentic workflow

The following table lists the agents that are used in the Process images for new tasks agentic workflow.  
Important:  
In the Define availability step of each AI agent's guided setup, make sure that the Status toggle is enabled to activate the AI agent.
{#images-tasks__table_bff_fnf_m2c__entry__3}

| AI agent name | AI agent description | Role required |
|-|-|-|
| Document and visual insights AI agent | Extracts information from images. | platform_ml_di.creation_agent |
[Table 2. AI agents names and descriptions in the Process images for new tasks agentic workflow]

{#images-tasks__table_bff_fnf_m2c}

## Other Platform agentic workflows

For more information on other agentic workflows associated with the Platform workflow, see [Platform agentic workflows](https://www.servicenow.com/docs/sNLCaoIlv3fOyOjzNa1R3Q "You can use the available Platform agentic workflows to achieve business outcomes with self-executing autonomous AI agents.").

*[\>]: and then


