Windows Credential issue

Chintu1 · ‎05-16-2020

Hi All,

we are doing windows server discovery through out the enterprise network and it's working fine. But for one windows server we are getting credential Time out error, And we can able to login to the server using RDC. And we know there is no Firewall block and port 135 is also open for the server.

And when we run the simple WMI command from the MIDserver Host we are getting error like "No such Interface supported". So after reviewing the error from below KB article, it seems like Firewall issue, But the port is open.

https://hi.service-now.com/kb_view.do?sysparm_article=KB0787202

So please me out to get this issue resolved.

Thanks in Advance.

Best regards

CG.

Allen Andreas · ‎05-16-2020

Hi,

Unfortunately, this all points to a firewall issue even though you are saying there isn't one. Please check for ALL types of firewalls on this IP. McAfee or otherwise.

Please mark reply as Helpful/Correct, if applicable. Thanks!

Please consider marking my reply as Helpful and/or Accept Solution, if applicable. Thanks!

Chintu1 · ‎05-17-2020

Thanks for your response Allen.

Allen Andreas · ‎06-01-2020

Hi,

I just wanted to check in on this. If my reply helped guide you correctly, please mark it as Helpful & Correct.

Thank you!

Please consider marking my reply as Helpful and/or Accept Solution, if applicable. Thanks!

Chintu1 · ‎06-02-2020

Thanks for the follow up Allen, just trying to open up the High DCOM ports as chuck informed. But i didn't see anything about the McAfee thing yet.