Juniper SRX550 - SNMP discovery - active, couldn't classify

thebananek
Tera Contributor

Hi

Were you able to fully discover Juniper SRX550? If yes then does adding of MIB/OID is required?

I'm asking because in my case the device can't be classified.

 

1. I found that Juniper Firewall classifier has 2 criteria:  

thebananek_0-1700737779220.png

and as I check logs I see that first condition is not meet, as it lacks "firewall" word.

 

  • <sysDescr oid="1.3.6.1.2.1.1.1" type="SnmpOctetString">Juniper Networks, Inc. vsrx internet router, kernel JUNOS 23.2R1.13, Build date: 2023-06-16 11:01:53 UTC Copyright (c) 1996-2023 Juniper Networks, Inc.</sysDescr>

 

2. Or maybe Standard Network Router classifier would be better?
But in logs I can't find any value corresponding to "routing"

thebananek_1-1700738164815.png

 

What can be done here? I am pretty new to SNMP discoveries.

 

Best Regards

7 REPLIES 7

Abbas_5
Tera Sage
Tera Sage

Hello @thebananek,
Please refer to the below link:
https://support.servicenow.com/kb?id=kb_article_view&sysparm_article=KB0535236

 

Mark my correct and helpful, if it is helpful and please hit the thumbs-up button to mark it as the correct solution.
Thanks & Regards,
Abbas Shaik

@Roshan Tiwari 

I verified things described in the article.
- CMDB CI Class Models - version 1.41.0

- Next Generation Juniper Network Firewall discovery pattern is present

- Juniper Firewall (SNMP classification) in Triggers probes tab contains Next Generation Juniper Network Firewall pattern.

 

Everything looks fine till now. But for me it's problem with condition in Juniper Firewall classifier as I described it in main post. Any clue how it can be fixed? 

Check If OID is available or not