Cisco ISE Servers Discovery hosted on VMware

AbdulBadi
Tera Contributor

Hi Community,

I am trying to discover Cisco ISE virtual appliances/ Servers hosted on VMware vCenter.

The VM infrastructure is not discovered, and I also need to discover and classify the ISE Servers/nodes correctly using their management IPs. I could not find a clear out-of-box Cisco ISE pattern or dedicated CMDB class in our current environment.

Could you please advise:

  • Which protocol should be used: SNMP, SSH, or Cisco ISE REST API?
  • Which CMDB class should represent the ISE appliance?
  • Is an out-of-box OID classification or Visibility Content pattern available?
  • How should the ISE appliance be related to its VMware VM CI?

If anyone has successfully implemented Cisco ISE Discovery, please share the classifier, CI class, relationship, and pattern or integration approach used.

Thank you.
Abdul Mohammed

7 REPLIES 7

sivasankaris
Tera Guru

Hi @AbdulBadi ,

It seems like we didn't have any out of box patterns for discoverying the ISE Virtual Servers.. But we do have the Service Graph connectors for ISE Servers, Here you can find the details here..

https://store.servicenow.com/store/app/3ffe589d97157a103b7e30d71153af68

Hope this helps., If it is useful., Please Mark it as helpful and please Accept the Solution..

 

Best Regards

SIVASANKARI S

Hi @sivasankaris 

Thanks for your suggestion, but the goal is different in my case.

I did find that article but in our infra this Application is classified as one of the critical applications so post discovery, we are trying to perform a Top-Down mapping on this, and end goal is creating Service Map using Discovery.

I had created SNMP Credentials and tried running discovery in lower QA to test this it's getting discovered under IP Switch Class trying to wonder if we can have this discovered and added under network appliances in cmdb_ci_net_app_server table. How can i perform this without falling into any other errors without breaking any existing capabilities (Like Brs, or any blackened scripts) running on this CI class.

Hi @AbdulBadi ,

One thing to conform if it's network appliance but classified as switch means this is due to OID Issue ., where our devices getting classified as different device than our expected device..

 

Go through this article where you find the details for configuring the OID..

https://www.servicenow.com/community/itom-forum/discovery-classification-error/m-p/3462131

 

If this works, Please Accept the Solution.. please Mark it as helpful//

Hi @sivasankaris 

I have seen your article So in my case its bit different.

As you see here the OID is already present here. But as Standard Network Switch and table as IP switch, so discovery classifies it under IP switch.

AbdulBadi_0-1793737582660.png


Additionally, the pattern it triggers is - 

AbdulBadi_1-1793737683340.png



AbdulBadi_2-1793738114479.pngAbdulBadi_3-1793738146761.pngAbdulBadi_4-1793738180508.png

 


But as per my Process Owner we are trying to classify and store this under - 

cmdb_ci_net_app_server, But when i checked I couldnot find any particular classification and Pattern for this particular class. 

I am not sure how this can be performed Instead of Storing this CI under IP switch is there any possibility of making this stored under 

cmdb_ci_net_app_server Table.?

Please let me know if you have any solution on this.

Thanks,
Abdul Mohammed