We were able to start discovery on 3 subnets and after doing so, we got several Next Hop Routing Rule CI's in our CMDB. The name is (empty) so I am curious what these are used for? Here is the data:
Dest IP network: 0.0.0.0/24
Next hop IP address: 10.x.x.1 (removed full IP address)
Type: None
Exit Interface Rule: 10.x.x.0/24 (removed full IP address but the 2nd and 3rd set match next hop)
Configuration Item: Server-Name (Windows Server)
This is just one example, but we have 150 of these entries.
Note:
The MID server is on a different network, so the router we used to get discovery setup has an SNMP string entered, but its unique to that router. They wanted a string they could disable if discovery causes issues on the network and they can disable that string and not a string used for all the devices. Thus we are not discovering network devices in this first pass. We did this as discovering one router added almost 1000 CI's.
