Discovery of ILO devices -"Discovery status is FAIL, Identification sections in pattern failed" erro

[PhilomanR]

Classification by device name: HP ILO devices

Hello, 

We have HP ILO devices which were discovered couple of years ago and are currently classified as " server chasis" and were last responded 3 months ago.

I am now trying to discover them through quick discovery based on SNMP to classify them as "OUT OF BAND" devices, but the discovery log shows error " Failed Exploring CI Pattern, Pattern name: UCS - HD, To Check Pattern Log Press here" 

The pattern log displays the below error: Can someone suggest the reason for the below error and also hoping to get resolution as well. 

Identification Engine: Discovery status is FAILURE, Identification sections in pattern failed: section: discovery, error: Match step predicate is not matched. Failed Condition(s): [(${login} : value=login_failed) NOT CONTAINS "login_failed"] .

[Selva Arun]

Hi,

Please take a look at the below community post where @XCHRT has posted the solution.

https://www.servicenow.com/community/cmdb-forum/devices-failing-ucs-discovery/m-p/2556503/page/3

If you believe the solution provided has adequately addressed your query, could you please **mark it as 'Helpful'** and **'Accept it as a Solution'**? This will help other community members who might have the same question find the answer more easily.

Thank you for your consideration.

Selva Arun

[conwayl]

Hello,

We ended up creating a custom pattern to capture the data from the XML.

Two HTTP Classifications were created based on the paths "/redfish/v1/" and "/xmldata?item=all" where the output contains "Integated Lights" or "iLO" vs. utilizing SNMP.

I've attached some screen prints from the HPE iLO Pattern showing what we're pulling into the Out-of-Band CI.

Best of luck!

Lena

[Doci1 · Accepted solution]

I would reccomend SNMP discovery and custom pattern described below for iLO.