Trying to create an aging report

Conan_Lloyd · ‎03-23-2012

Bear with me, I'm pretty new to SN and very new to scripting. I'm pretty good at reverse engineering things but not as great at creating from scratch. After searching the forums I noticed that there didn't seem to be a way to get an aging report for incidents. (How many open are 0-2 days old, 3-7 days old, etc.)

Below is what I have tried and it's not quite working yet, anyone wanna point out where I screwed up?

I created a new field called Aging Category (u_aging_category) on the incident table.

I wrote the following script as a scheduled job:

//************************ Set Aging Category **************************************

var optime = current.opened_at.getGlideObject().getNumericValue();
var nowtime = gs.nowDateTime().getGlideObject().getNumericValue();
var totalTime = nowtime - optime ;
var calculation = totalTime/1000/60/60/24;

if (calculation <= 2){
current.u_aging_category = '0-2 Days';
}
if (calculation <= 7 && calculation > 2){
current.u_aging_category = '3-7 Days';
}
if (calculation <= 14 && calculation > 7){
current.u_aging_category = '8-14 Days';
}
if (calculation <= 21 && calculation > 14){
current.u_aging_category = '15-21 Days';
}
if (calculation <= 28 && calculation > 21){
current.u_aging_category = '22-28 Days';
}
if (calculation > 28){
current.u_aging_category = '> 28 Days';
}

In theory this should update the Aging Category field when I run the job and then I can report on it using a Pivot table. Unfortunately, the field is not updating. Any quick thoughts?

Jim Coyne · ‎03-24-2012

I believe the problem is you are not actually querying any records, nor updating them. This is what I have done.

I have a Scheduled Job...

...that calls a function in a Script Include:


function u_updateAgingCategoryField() {
  var elapsedTime = 0;
  var aging = '';
  var currentTimeNow = gs.nowDateTime();
  var gr = new GlideRecord('incident');
  gr.addEncodedQuery('u_aging_category!=>28^ORu_aging_category=');
  gr.query();
  while(gr.next()) {
    elapsedTime = (gs.dateDiff(gr.opened_at, currentTimeNow, true)) /60/60/24;

    //check to see when the item was created
    if (elapsedTime <= 2) aging = '0_2';
    if (elapsedTime > 2)  aging = '3_7';
    if (elapsedTime > 7)  aging = '8_14';
    if (elapsedTime > 14) aging = '15_21';
    if (elapsedTime > 21) aging = '22_28';
    if (elapsedTime > 28) aging = '>28';

    gr.setWorkflow(false);    //skip any Business Rules
    gr.autoSysFields(false);  //do not update system fields
    gr.u_aging_category = aging;
    gr.update();
  }
}

Notice in the function that I am excluding incidents >28 days because we do not want to keep updating them with ">28 Days" all the time.

Now for the trick so that the Pivot Table orders the columns properly - on the Aging Category dictionary record, set the Default value to be "0_2" and the Choice field to "Dropdown without -- None --" and create some Choice entries:

Otherwise the report will sort the columns alphabetically. And so you should end up with the following report:

It is setup in https://demo23.service-now.com/ at the moment. I've also attached an update set that will re-create it for you if you do not get a change to look at demo23 today.

View solution in original post

kduong · ‎10-06-2015

Hi Jim,

thanks for replying

the 31_60 and 61_90 is getting populated with >30days even when its over 30 days.

Could this also be a issue since i'm only using a date field instead of date/time? and yes they are in the choice list for the field.

Thanks,

Ken

Lola B · ‎06-14-2016

This script worked better for me:

var elapsedTime = 0;

var aging = '';

var currentTimeNow = gs.nowDateTime();

var queryString ='active=true';

var gr = new GlideRecord("incident");

gr.addEncodedQuery(queryString);

gr.query();

while(gr.next()) {

elapsedTime = (gs.dateDiff(gr.opened_at, currentTimeNow, true)) /60/60/24;

//check to see when the item was created

if (elapsedTime <= 2) aging = '0_2';

if (elapsedTime > 2) aging = '3_7';

if (elapsedTime > 7) aging = '8_14';

if (elapsedTime > 14) aging = '15_21';

if (elapsedTime > 21) aging = '22_28';

if (elapsedTime > 28) aging = '>28';

gr.setWorkflow(false); //skip any Business Rules

gr.autoSysFields(false); //do not update system fields

gr.u_aging_category = aging;

gr.update();

}

indukamaraj · ‎07-12-2018

Hi ,

Can you please let me know how to fetch reports for Aging Stories assigned to a particular work group.

Thanks

Indu