Trying to create an aging report

Conan_Lloyd · ‎03-23-2012

Bear with me, I'm pretty new to SN and very new to scripting. I'm pretty good at reverse engineering things but not as great at creating from scratch. After searching the forums I noticed that there didn't seem to be a way to get an aging report for incidents. (How many open are 0-2 days old, 3-7 days old, etc.)

Below is what I have tried and it's not quite working yet, anyone wanna point out where I screwed up?

I created a new field called Aging Category (u_aging_category) on the incident table.

I wrote the following script as a scheduled job:

//************************ Set Aging Category **************************************

var optime = current.opened_at.getGlideObject().getNumericValue();
var nowtime = gs.nowDateTime().getGlideObject().getNumericValue();
var totalTime = nowtime - optime ;
var calculation = totalTime/1000/60/60/24;

if (calculation <= 2){
current.u_aging_category = '0-2 Days';
}
if (calculation <= 7 && calculation > 2){
current.u_aging_category = '3-7 Days';
}
if (calculation <= 14 && calculation > 7){
current.u_aging_category = '8-14 Days';
}
if (calculation <= 21 && calculation > 14){
current.u_aging_category = '15-21 Days';
}
if (calculation <= 28 && calculation > 21){
current.u_aging_category = '22-28 Days';
}
if (calculation > 28){
current.u_aging_category = '> 28 Days';
}

In theory this should update the Aging Category field when I run the job and then I can report on it using a Pivot table. Unfortunately, the field is not updating. Any quick thoughts?

Jim Coyne · ‎03-24-2012

I believe the problem is you are not actually querying any records, nor updating them. This is what I have done.

I have a Scheduled Job...

...that calls a function in a Script Include:


function u_updateAgingCategoryField() {
  var elapsedTime = 0;
  var aging = '';
  var currentTimeNow = gs.nowDateTime();
  var gr = new GlideRecord('incident');
  gr.addEncodedQuery('u_aging_category!=>28^ORu_aging_category=');
  gr.query();
  while(gr.next()) {
    elapsedTime = (gs.dateDiff(gr.opened_at, currentTimeNow, true)) /60/60/24;

    //check to see when the item was created
    if (elapsedTime <= 2) aging = '0_2';
    if (elapsedTime > 2)  aging = '3_7';
    if (elapsedTime > 7)  aging = '8_14';
    if (elapsedTime > 14) aging = '15_21';
    if (elapsedTime > 21) aging = '22_28';
    if (elapsedTime > 28) aging = '>28';

    gr.setWorkflow(false);    //skip any Business Rules
    gr.autoSysFields(false);  //do not update system fields
    gr.u_aging_category = aging;
    gr.update();
  }
}

Notice in the function that I am excluding incidents >28 days because we do not want to keep updating them with ">28 Days" all the time.

Now for the trick so that the Pivot Table orders the columns properly - on the Aging Category dictionary record, set the Default value to be "0_2" and the Choice field to "Dropdown without -- None --" and create some Choice entries:

Otherwise the report will sort the columns alphabetically. And so you should end up with the following report:

It is setup in https://demo23.service-now.com/ at the moment. I've also attached an update set that will re-create it for you if you do not get a change to look at demo23 today.

View solution in original post

billv6 · ‎08-27-2014

Hi Jim,

Thanks for that, our instance is currently Calgary, but we are planning to upgrade to Eureka next month.

Jim Coyne · ‎08-27-2014

So I'm assuming that fixed your issue with the code not running, correct? But you still have the ordering problem?

billv6 · ‎08-28-2014

Yes Jim, That's right, the code now are running fine, thanks for the tip, but I have still facing issues with the ordering, so weird... 😞

billv6 · ‎08-28-2014

I'm not sure if this is something that we can consider, but in your code, you used the choice values in the script include to set the aging, I've tried this but it is not working for me, so I tried with the choice labels in the script include and it is working, except for the ordering...

sunit8 · ‎07-20-2015

Hi Jim,

First of all Thanks a lot for the Aging report. I do actually have an added requirement with this . Could you please help me out.

The Requirement is , I need this report to be scheduled daily (That I have no issue with). Then email should contain the report in the body and not as an attachment.. Correct me if am wrong, We need to build a mail script for this . Right ?

Also for my report the Column stays the same, for rows its configuration item in my case. And I do have an extra column at the end which will give me the Total number of incidents open.

Can you help me out with this , please ?