Generate a certificate

  • Rversion finale: Australia
  • Mis à jour 12 mars 2026
  • 1 minute de lecture

    • Generate a certificate to use or upload your own certificates. Certificates enable communication between the Discovery Console for OT and the Discovery Sensor for OT.

    Avant de commencer

    Remarque :
    If you choose to do so, you can create your own certificate if it is required by your company's policies.

    Role required: admin

    Pourquoi et quand exécuter cette tâche

    After the Discovery Console for OT is installed, there are default, preloaded certificates that allow the Console to power up. However, following this initial boot, it is recommended that you use the Console to generate a new CA. To do that, in the Console, navigate to Sensor >Certificates > Generate CA. This task describes how to generate a new certificate for the Discovery Console for OT.


    Generate certificate

    Procédure

    1. Navigate to the Discovery Console for OT Settings > Certificate tab.
    2. Generate a new bundle or upload an existing bundle.
      Remarque :
      You are not obligated to use the ServiceNow provided certificates and you may choose to use your own.
      OptionDescription
      Generate a new bundle
      1. Under Update Certificate, select Generate New Bundle.
      2. Select the Generate Bundle button.
      Upload an existing bundle
      1. Under Update Certificate, select Upload Bundle (.p12).
      2. Use the Choose File button and select the bundle to upload.
      3. If needed, enter a Bundle Password.
      4. Select the Upload Bundle button.
      Remarque :
      Generating or uploading certificates also updates any current certificates.

    Résultats

    A certificate is generated. The Discovery Console for OT reboots.

    Que faire ensuite