Configure the Scheduled state

Administrators can optionally enable the Scheduled state flow for work orders and work order tasks. By configuring these settings, you can control when and how tasks are dispatched to technicians.

始める前に

Role required: wm_admin

手順

1. Navigate to Field Service > Administration > Configuration.
2. Select the Assignment tab.
3. Select Use scheduled state.
   注:

   When Dispatch queue is turned off, Use scheduled state is automatically turned off. ​When Dispatch queue is enabled, Use scheduled state is NOT automatically enabled.
4. Select Save.
5. Navigate to Field Service > Administration > Properties.
6. Select a Mode setting to activate the scheduled state.
   • Duration

     This mode updates the state of tasks from Scheduled to Assigned when the start threshold (in hours) is reached.

   • Number of tasks

     This mode controls the Number of tasks that are in the Scheduled state before they’re assigned.

7. Modify the corresponding property to define when a work order task should be dispatched (moved from Scheduled to Assigned).
   • For Duration mode:
     • Scroll down to Update task state from Scheduled to Assigned when the scheduled start is within specified hours from current time.
     • Default value: 12 hours
     • Example: If you set the Duration mode to 12 hours, any tasks scheduled to start within the next 12 hours are assigned. Tasks scheduled to start after this period remain in the Scheduled state.
   • For Number of tasks mode:
     • Scroll down to Count of tasks that are in assigned state before they are scheduled.
     • Default value: 1
     • Example: If you set the Number of tasks mode to 1, only one task will be assigned to a technician at a time, while all remaining tasks will stay in the Scheduled state.
   注:

   The Scheduled State Processor will move tasks to the Assigned state whenever the number of Assigned tasks is less than the property value. By default, only tasks that are already scheduled can be assigned.
8. Select Save.
9. If you selected, Number of tasks mode, navigate to All > System Definition > Scheduled Jobs.
10. In the Name search, type 'Assign number of tasks by number of tasks' and press enter.
11. Click Assign scheduled tasks by number of tasks to open the record.
12. Select the Active option to enable
13. Enter the desired interval in the Repeat interval field.
    By default, the repeat interval is set to 5 minutes.
14. Select Update.

タスクの結果

• On a work order form, the following occurs:
  • A new state Scheduled appears between Ready For Dispatch and Assigned if qualification isn’t enabled.
  • A new state Scheduled appears between Qualified and Assigned if qualification is enabled.
• On a work order task form, a new state Scheduled appears between Pending Dispatch and Assigned.

注:

If you turn the Use scheduled state property off, a warning appears indicating that tasks have moved from Scheduled to Assigned. Consequently, all work order tasks that are in the Scheduled state are moved to the Assigned state.​