Service Graph Connector for Microsoft Azure properties

  • Rversion finale: Australia
  • Mis à jour 12 mars 2026
  • 7 minutes de lecture

    • Service Graph Connector for Microsoft Azure properties control the behavior of the connector.

    Connection properties

    These connection properties are available for the Service Graph Connector for Microsoft Azure hardware connections.
    Remarque :
    To open the Service Graph Connection Properties [sn_cmdb_int_util_service_graph_connection_property] table for the connector, navigate to All > Service Graph Connectors > Azure > Connections, and select the hardware connection name. The connection properties are displayed in the Service Graph Connection Properties related list.
    Tableau 1. Connection properties for Service Graph Connector for Microsoft Azure
    Property Description

    vmGraphQuery

    		 Specify the resource graph query on which the Run command should be executed. By default, the Run command is executed on all running VMs.
    • Type: string
    • Default value: empty

    filter_databricks

    		 This property is used to filter Azure Databricks CIs using the Vendor tag provided by Azure.

    Azure Databricks virtual machines (VMs), Network Interface Controllers (NICs), and storage volumes (collectively called Azure Databricks CIs) have the value of the Vendor tag set to Databricks.

    Starting with the Service Graph Connector for Microsoft Azure 1.14.0 version, all Azure Databricks CIs that have the value of the Vendor tag set to Databricks are filtered out from discovery during a full data load.

    During delta loads, set the value of the insert_short_lived_vms custom system property to false to filter Azure Databricks CIs that are marked as retired during discovery (see Custom system properties). Additionally, for each Hardware connection, set the filter_databricks connection property to true.

    • Type: true | false
    • Default value: false
    Properties used for the Run command

    scriptsContainerName

    		 Enter the name of the container where the .sh and .ps1 files are uploaded in Azure.
    • Type: string
    • Default value: empty

    storageAccountName

    		 Enter the name of the storage account where the containers are created.
    • Type: string
    • Default value: empty

    storageSubsription

    		 Enter the subscription ID where the storage account is created.
    • Type: string
    • Default value: empty

    storageContainerName

    		 Enter the name of the container where the results of the commands are to be stored.
    • Type: string
    • Default value: empty

    storageResourceGroup

    		 Enter the resource group of the storage account.
    • Type: string
    • Default value: empty

    powershellScriptURI

    		 Enter the URI of the .ps1 file that is to be run on Windows machines.
    • Type: URI
    • Default value: empty

    shellScriptURI

    		 Enter the URI of the .sh file that is to be run on Linux machines.
    • Type: URI
    • Default value: empty

    lookback_time_in_days

    		 This property is used for record removal. Time in days in which the sys_object_source records are queried for the deletion of CIs. The value is automatically updated to 15 after the initial run.

    Set the value of this property to empty to include all the older records populated by SG-Azure as removal candidates for the Integration Commons record removal API.

    Remarque :
    Do not modify this property if the value is empty.
    • Type: integer
    • Default value: empty

    For more information about the Run command for the Service Graph Connector for Microsoft Azure, see Instructions for setting up Run Command in Service Graph Connector for Azure [KB2001668]

    Default system properties

    These default system properties are available for Service Graph Connector for Microsoft Azure.
    Remarque :
    To open the System Properties [sys_properties] table, enter sys_properties.list in the navigation filter.
    Tableau 2. Default system properties for Service Graph Connector for Microsoft Azure
    Property Description

    api_retry_max

    		 Enter the maximum retry limit for a Microsoft Azure API call made from the data sources within the connector.
    • Type: integer
    • Default value: 3
    • Location: System Property [sys_properties] table

    api_retry_max_without_backoff

    		 Enter the maximum retry limit for a Microsoft Azure API call made from the data sources within the connector, without using exponential backoff to increase the waiting time between consecutive retries.
    • Type: integer
    • Default value: 3
    • Location: System Property [sys_properties] table

    azure_full_pull_partition_size

    		 Set the partition size for Azure full data pull. This property determines the number of subscriptions that each partition processes. The value must be set to a numeric value greater than 0.
    • Type: integer
    • Default value: null
    • Location: System Property [sys_properties] table
    Remarque :
    If no value is specified, the property value is determined based on the number of active threads in the instance.

    See Set partition size for parallel loading-enabled Azure accounts.

    delta_grace_time

    		 Enter the additional time period in hours added to the current delta pull period when fetching incremental changes.
    • Type: integer
    • Default value: 0
    • Location: System Property [sys_properties] table

    delta_page_size

    		 Enter the page size, that is, the maximum number of records fetched per page in a data pull for the data sources within the connector.
    • Type: integer
    • Default value: 500
    • Location: System Property [sys_properties] table

    is_delta_sync_enabled

    		 Set the property to false to deactivate delta synchronization.
    • Type: true | false
    • Default value: false
    • Location: System Property [sys_properties] table

    See Configuring data synchronization in Service Graph Connector for Microsoft Azure.

    LDC_status

    		 Set the property to true to enable populating the passive status of an Azure datacenter (also known as a logical datacenter) in the Comments attribute of the Azure Datacenter [cmdb_ci_azure_datacenter] CI class when the regionType attribute is Logical or the service account for the datacenter is deactivated .
    • Type: true | false
    • Default value: false
    • Location: System Property [sys_properties] table

    load_balancer_page_limit

    		 Enter the maximum number of records per page to be fetched in a delta pull for the SG-Azure Load Balancers data source.
    • Type: integer
    • Default value: 500
    • Location: System Property [sys_properties] table

    maximum_delta_total_period

    		 Enter the maximum time period in days preceding the current run time during delta pull.
    • Type: integer
    • Default value: 7
    • Location: System Property [sys_properties] table

    maximum_delta_window_period

    		 Enter the maximum time duration in hours for each API call to repeat within the total delta period during delta pull.
    • Type: integer
    • Default value: 24
    • Location: System Property [sys_properties] table

    network_interface_page_limit

    		 Enter the maximum number of records per page to be fetched in a delta pull for the SG-Azure Network Interface data source.
    • Type: integer
    • Default value: 500
    • Location: System Property [sys_properties] table

    pull_disabled_subscriptions

    		 Set the property to false to deactivate the import of resources associated with deactivated Azure subscriptions.
    • Type: true | false
    • Default value: true
    • Location: System Property [sys_properties] table

    save_rest_response_as_attachment

    		 Set the property to true to save the response from Azure Resource Graph API calls as an attachment and read the data. Set this value to true if more than 10MB data is returned from Resource Graph API calls.
    • Type: true | false
    • Default value: false
    • Location: System Property [sys_properties] table

    security_group_page_limit

    		 Enter the maximum number of records per page to be fetched in a delta pull for the SG-Azure Security Group data source.
    • Type: integer
    • Default value: 500
    • Location: System Property [sys_properties] table

    software_page_limit

    		 Enter the maximum number of records fetched per page when importing software data through the SG-Azure Software data source.
    • Type: integer
    • Default value: 5000
    • Location: System Property [sys_properties] table

    tcp_and_process_page_limit

    		 Enter the maximum number of records fetched per page when importing TCP and running process data through the SG-Azure TCP data source.
    • Type: integer
    • Default value: 1000
    • Location: System Property [sys_properties] table

    tcp_time_period

    		 Enter the time period in hours during which TCP and running process data is imported through the SG-Azure TCP data source.
    • Type: integer
    • Default value: 1
    • Location: System Property [sys_properties] table

    vm_power_state_page_limit

    		 Enter the maximum number of records fetched per page when importing the power state of VMs through the SG-Azure VM Config Data data source.
    • Type: integer
    • Default value: 1000
    • Location: System Property [sys_properties] table

    Custom system properties

    You can create these custom system properties for the Service Graph Connector for Microsoft Azure. These properties must be created in the Service Graph Connector for Microsoft Azure application scope. The custom properties that you create are listed in the System Properties [sys_properties] table.

    For more information about creating custom system properties, see Add a system property.
    Tableau 3. Custom system properties for Service Graph Connector for Microsoft Azure
    Property Description

    sn_sg_azure_integ.network_page_limit

    		 Set the maximum number of records per page to be fetched for the SG-Azure Network data source.
    • Type: integer
    • Default value: 100

    sn_sg_azure_integ.insert_short_lived_vms

    		 Set the property to false to filter out Azure Databricks CIs during delta loads.
    • Type: true | false
    • Default value: true
    • Location: System Property [sys_properties] table

    sg_azure_generic_resource_type_dynamic_create

    		 Set the property to true to populate supported resources in the Service Graph Resource Inclusion Whitelist [sn_cmdb_int_util_service_graph_resource_inclusion_whitelist] table.
    • Type: true | false
    • Default value: false
    • Location: System Property [sys_properties] table
    When the sg_azure_generic_resource_type_dynamic_create system property is set to true, the connector populates the following generic resources in the Service Graph Resource Inclusion Whitelist [sn_cmdb_int_util_service_graph_resource_inclusion_whitelist] table.
    • Microsoft.Compute/availabilitySets
    • Microsoft.Compute/disks
    • Microsoft.Compute/locations
    • Microsoft.Compute/virtualMachines
    • Microsoft.DBforPostgreSQL/servers
    • Microsoft.Network/loadBalancers
    • Microsoft.Network/networkInterfaces
    • Microsoft.Network/networkSecurityGroups
    • Microsoft.Network/publicIPAddresses
    • Microsoft.Network/virtualNetworks
    • Microsoft.ResourceGraph/resources
    • Microsoft.Sql/servers
    • Microsoft.Storage/storageAccounts
    • Microsoft.Web/sites

    Related content

    Data mapping for Service Graph Connector for Microsoft Azure

    CMDB classes targeted in Service Graph Connector for Microsoft Azure